Tiger 10000V RFID Solar Guard Tour System

Tiger-10000V is RFID  Solar guard tour system. It has different charging method and shape of reader from the ordinary guard tour system. The reader is charged by solar. So it is more widely used. The system consists of reader, RFID tags and software mainly. The reader could collect the data of RFID tags within the distance of 5cm without touching the tags and store in the reader. And the data stored in the reader will be uploaded onto the software through USB cable. When it works, the reader has two ways to tell the user that the data have been collected which are buzz and indicator light.

Features and Techniques

About reader (Tiger-10000V)

Recharge batter by solar, environmental protection

Case is made of PU resin from USA, soft, stretch-proof, sweat proof, tough and pliable

Anti overvoltage, anti over current, anti lightning strike, anti static

Data reading time: ≤0.1S

Storage capacity: 10900 pcs, Alarm automatically when the memory reaches 99%

Length: 14mm

Width: 37mm

Weight: 260g

Power supplied by: 3.6V rechargeable lithium battery

Power consumption: Quiescent current-5μA, Working current-30mA

Working temperature: -60℃～+80℃

Working humidity: 10%～90%

About Tags (Tiger-RFID)

There are single RFID tags fixing on the site and guard ID keys for verifying guards’ ID.

Function: Read only

Memory: 64 bytes

Chip: EM H4001

Working frequency: 125 kHz

Coding method: Manchester

Power: No

Reading distance: ≤ 5cm

Working temperature: -20℃ ～ +50℃

Storage temperature: -40℃ ～ +85℃

Totally water proof

EMC: No effect by electromagnetic interference or X ray

Signal penetrability: Non metal material

Encapsulating material: ABS plastic

Shape: Standard type encapsulation and non-conventional type encapsulation

Weight of single RFID tag: 2g

Weight of guard ID key: 8g

Easy to install, able to be installed inside wall

About USB Cable:

Reliable for data reading and transmitting

Loss of data never happen when the communication process is interrupted

Standard USD communication port

Structure: Four single-stranded hard copper wire, high density polythene colour coding insulator

Anti electromagnetic interference

Standard complying to: YD/T1019, IEC61156, ANSI/EIA/TIA-568

Latency: 5.02 ns/m

Impedance: 107-110hm

Return loss: 26.0dB

Configuration table